Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Ozone-depleting Substances and Halocarbon Alternatives Regulations

Version of section 60 from 2018-04-16 to 2024-08-18:


Marginal note:Calculation of manufacturing allowance

  •  (1) The annual manufacturing allowance for an HCFC set out in Table 3 of Schedule 1 to which each person is entitled is determined as follows:

    • (a) for each calendar year that falls within the period that begins on January 1, 2015 and ends on December 31, 2019, in accordance with the following formula:

      A × B / C

      where

      A
      is 81.9 ODP tonnes,
      B
      is the quantity manufactured by a person for 2013, expressed in ODP tonnes, and
      C
      is the quantity manufactured in Canada, expressed in ODP tonnes; and
    • (b) for each calendar year that falls within the period that begins on January 1, 2020 and ends on December 31, 2029, by multiplying the manufacturing allowance granted for 2019 by 5%.

  • Marginal note:Greater manufacturing allowance

    (2) When it is necessary to allow Canada to fulfill its obligations under an agreement with a Party for the purpose of industrial rationalization or to satisfy domestic HCFC needs, the Minister may permit, for a calendar year, a greater manufacturing allowance than that which a person would have obtained under subsection (1) and that greater manufacturing allowance is not taken into account in any subsequent calculation of the annual manufacturing allowance.

  • Marginal note:Written notice

    (3) The Minister must inform the person in writing of their manufacturing allowance.

  • SOR/2017-216, s. 8

Date modified: