Language selection

Government of Canada

Search

United States Surtax Remission Order (2025) (SOR/2025-122)

Regulations are current to 2026-01-19 and last amended on 2025-12-11. Previous Versions

Table of Contents

United States Surtax Remission Order (2025)

SOR/2025-122

CUSTOMS TARIFF

Registration 2025-04-16

United States Surtax Remission Order (2025)

P.C. 2025-466 2025-04-16

Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, makes the annexed United States Surtax Remission Order (2025) under section 115Footnote a of the Customs TariffFootnote b.

Marginal note:Remission — public health, public safety and national security

1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods imported for use by any of the following entities for the purpose of health care, public health, public safety, national defence or national security:

  • (a) a government health research organization or clinical health research organization;

  • (b) an organization that produces or stores medical countermeasures, including pharmaceuticals or medical devices;

  • (c) the office of a public health official, as defined in subsection C.10.001(1) of the Food and Drug Regulations;

  • (d) an organization that provides ambulance or other emergency response services;

  • (e) a firefighting service;

  • (f) a law enforcement agency;

  • (g) a federal or provincial correctional service;

  • (h) the Department of National Defence;

  • (i) the Canadian Forces; or

  • (j) the Canadian Security Intelligence Service.

Previous Version

Marginal note:Remission — health care

2 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1), the United States Surtax Order (Steel and Aluminum 2025) or the United States Surtax Order (Motor Vehicles 2025) in respect of goods imported

  • (a) for use in the provision of medically necessary health care services, including services provided at

    • (i) a hospital,

    • (ii) a health care or dental clinic,

    • (iii) a medical, dental or diagnostic laboratory, or

    • (iv) a long-term care facility; or

  • (b) for use by any of the following entities for the purpose of health care or public health:

    • (i) an entity that provides products or services related to blood, cells, tissues or organs for medically necessary health care, or

    • (ii) a federal, provincial, local or Indigenous health authority.

Previous Version

Marginal note:Remission — manufacture, processing, production or packaging

3 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of goods imported for use, in Canada, in the manufacture or processing of any good, in the production of any agricultural product or in the packaging of a food product or beverage.

Previous Version

Marginal note:Remission — United States Surtax Order (Steel and Aluminum 2025)

3.1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum 2025) in respect of goods imported

  • (a) for use in the manufacture of motor vehicles or chassis for motor vehicles or in the manufacture of parts of or accessories for motor vehicles or chassis for motor vehicles; or

  • (b) for use in aircraft, ground flying trainers or spacecraft or in parts of aircraft, ground flying trainers or spacecraft.

Marginal note:Remission — goods referred to in Schedule 1

4 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) in respect of the goods referred to in column 1 of Schedule 1 that are classified under a tariff classification number set out in column 2.

Previous Version

Marginal note:Remission — goods referred to in Schedules 2 and 3

4.1 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods referred to in column 2 of Schedule 2 or 3 that are classified under a tariff classification number set out in column 1.

Marginal note:Remission — goods referred to in Schedule 4

4.2 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.

Previous Version

Marginal note:Remission — goods referred to in Schedule 4.1

4.21 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (2025-1) or the United States Surtax Order (Steel and Aluminum 2025) in respect of the goods that are classified under a tariff classification number set out in column 2 of Schedule 4.1.

Marginal note:Remission — motor vehicles

4.3 Subject to section 5, remission is granted of surtaxes paid or payable under the United States Surtax Order (Motor Vehicles 2025) in respect of

  • (a) motor vehicles that are classified under a tariff classification number set out in Schedule 5;

  • (b) all-terrain vehicles, including utility terrain vehicles and side-by-side vehicles; and

  • (c) hearses and hearse limousines.

Previous Version

Marginal note:Conditions

5 Remission is granted on the following conditions:

  • (a) in the case of a good in respect of which remission is granted under section 1 or 2, it is imported into Canada before July 1, 2026;

  • (a.01) in the case of a good that is referred to in Schedule 1 to the United States Surtax Order (Steel and Aluminum 2025) and in respect of which remission is granted under section 3, it is imported into Canada before July 1, 2026;

  • (a.02) in the case of a good that is referred to in Schedule 2 to the United States Surtax Order (Steel and Aluminum 2025) and in respect of which remission is granted under section 3, it is imported into Canada before February 1, 2026;

  • (a.03) in the case of a good in respect of which remission is granted under section 3.1, it is imported into Canada on or after February 1, 2026 and before July 1, 2026;

  • (a.04) in the case of a good referred to in Schedule 3, it is imported into Canada before the date specified in column 3 of that Schedule;

  • (a.1) in the case of a good that is classified under a tariff classification number set out in column 2 of Schedule 4,

    • (i) it is imported into Canada by a person whose business number is set out in column 1,

    • (ii) it conforms to the description set out in column 3, if any,

    • (iii) it is imported before September 1, 2025, and

    • (iv) it is imported in accordance with the conditions set out in column 4, if any;

  • (a.2) in the case of a good that is classified under a tariff classification number set out in column 2 of Schedule 4.1,

    • (i) it is imported into Canada by a person whose business number is set out in column 1,

    • (ii) it conforms to the description set out in column 3, if any,

    • (iii) it is imported during the period specified in column 4, if any, and

    • (iv) it is imported in accordance with the conditions set out in column 5, if any;

  • (b) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; and

  • (c) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.

Previous Version

Marginal note:For greater certainty

5.1 For greater certainty, there is no time limit that applies in respect of the importation of goods referred to in section 4.3 or in Schedule 1, 2 or 5.

Marginal note:Coming into force

6 This Order comes into force on the day on which it is registered.

SCHEDULE 1(Section 4)

Goods

Column 1Column 2
ItemGoodsTariff Classification Number
1Specialized infant formulas
  • 2202.99.39.10
  • 2202.99.39.20
2Nutrition formulas, metabolic products, formulated liquid diet or human milk fortifiers
  • 1901.90.34.90
  • 1902.19.11.00
  • 1902.19.12.30
  • 1902.19.12.90
  • 1902.19.19.00
  • 1902.30.11.00
  • 1902.30.19.00
  • 2106.90.35.00
  • 2106.90.39.90
  • 2106.90.95.90
  • 2202.99.39.10
  • 2202.99.39.20
3Medical compression garments
  • 6115.10.10
  • 6115.10.91
  • 6115.10.99
4Sterile barrier film or pouches for use in medical manufacturing
  • 3923.21.90.90
  • 6305.39.00.00
5The following freezers and refrigerators:

  • (a) blood bank or plasma freezers;

  • (b) laboratory freezers;

  • (c) blood bank refrigerators;

  • (d) blood bank pass-thru refrigerators;

  • (e) laboratory refrigerators;

  • (f) pharmaceutical refrigerators;

  • (g) pharmaceutical or laboratory pass-thru refrigerators

8418.69.90
Previous Version

SCHEDULE 2(Section 4.1)

Goods

Column 1Column 2
ItemTariff Classification NumberGoods
10404.10.10

  • (a) Instantized whey protein concentrate, with a minimum 80% protein on a dry basis;

  • (b) Instantized whey protein hydrolysate, with a minimum 80% protein on a dry basis and a level of hydrolysis of 1 to 4%;

  • (c) Whey protein concentrate 80%

21006.20.00.10Long grain brown rice, husked for bulk processing in Canada
31006.30.00.11Long grain rice, semi-milled or wholly milled, whether or not polished or glazed, parboiled
3.11205.10.00.10Low erucic acid rape or colza seeds, for sowing
3.22204.29Wine of fresh grapes, other than sparkling wine, including fortified wines, in containers holding more than 10 litres, for further processing in Canada
42505.10.00Silica sand and quartz sands
53502.20.00

  • (a) Instantized whey protein isolate with a minimum of 90% protein on a dry basis;

  • (b) Whey protein isolate 90%;

  • (c) Hydrolyzed whey protein concentrate 80%

5.13918.90.90.90Linear low density polyethylene (LLDPE) grass in 200 foot long rolls, with a width of 26.75 inches
5.23923.21.90Three-ply form-fit packaging, constructed entirely of linear low-density polyethylene, each ply with a thickness of 3.2 thousands of an inch, with a 2-inch fill port with membrane and cutter, and a 2-inch dispense port, with internal seal dimensions of a length of 45 inches, of a width of 45 inches, of a height of 47 inches
63923.29.90Sacks and bags (including cones), of plastics
73925.90.00Fibreglass bullet-resistant wall panels
7.14011.70New pneumatic tires, of rubber, of a kind used on agricultural or forestry vehicles and machines
84011.80.10New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines, for use with combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, of a size of 36.00 inches × 51 inches or 40.00 inches × 57 inches
94011.80.90New pneumatic tires, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines with rim diameters of 27 inches or more
9.14011.90.10New pneumatic tires, of rubber, for use with appliances of subheading 8424.82, combination excavating and transporting scrapers of subheading 8429.30 or 8430.69, horticultural machinery for soil preparation and lawn or sports-ground rollers of heading 84.32, horticultural mowers (other than mowers for lawns, parks or sports-grounds) of heading 84.33 and of a size of 36.00 × 51 or 40.00 × 57
104012.90.90Tire treads and tire flaps, of rubber
114407.29.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of tropical wood: Cabreuva or Jatoba
124407.91.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of oak (Quercus spp.): white oak or red oak
134407.93.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of maple (Acer spp.)
144407.94.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of cherry (Prunus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%, No. 2 or No. 3 common grade
154407.95.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of ash (Fraxinus spp.), in bundles of debarked and sliced, raw (no coating, unshaped) sawn lumber, with a length of 8 to 12 feet, with a width of 4 to 24 inches, with a moisture content of 50 to 80%
164407.99.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. Of hickory (Carya spp.) or black walnut (Juglans spp.)
174408.10.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of coniferous wood
184408.39.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Of tropical wood: Other
194408.90.00Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. Other
204409.29.90Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed. Of shagbark hickory (Carya ovata) or mockernut hickory (Carya tomentosa), with straight grain and free of knots and defects: squares of a width of 1 inch, height of 1 inch and length of 18.5 inches or dowels of a diameter of 0.805 inches or 0.875 inches
214412.33.00Plywood sheets, of poplar (Populus spp.), of a thickness of 3/8 inch, of dimensions 4 feet × 8 feet, industrial grade, 4-ply, C-C finish
224412.99.00High density wood fibre panels, certified to be formaldehyde-free, of a thickness of 2.3 mm, sandblasted on both sides, light in colour
22.14819.10.00Cardboard containers, 8-ply, of interior dimensions of 42.5 inches length by 34.5 inches width, exterior dimensions of 46.5 inches length by 38.5 inches width by 42 inches height
234819.30.00.10Sacks and bags, having a base of a width of 40 cm or more, multiwall, of paper
244819.40.00.20Other sacks and bags, including cones, multiwall, of paper
255703.21.00Synthetic turf for sports applications for conversion into a modular system made in Canada, of straight fibres extruded and tapered (layer 1) and texturized fibres extruded then texturized, stretched and tapered (layer 2)
266305.33.00Polywoven bags, of a kind used for the packing of goods, of polyethylene or polypropylene strip or the like
26.17106.92.00.90Composite strip made of beryllium copper (C17200) with silver overlay
277113.11.10.90Clasps, posts, cups, earring backs or posts with settings, of 14 carat or 10 carat sterling silver, for use in the manufacture of jewelry
287113.19.10.90Rope chain or curb chain, of 14 carat or 10 carat gold, for use in the manufacture of jewelry
28.17116.20.90Polycrystalline diamond compact (PDC) cutters and blanks
28.27207.20.00.30Ductile iron bars, of cast iron, hot-rolled or rough turned, of grade 65-45-12 or 80-55-06, of specification ASTM A536
28.37208.38.00.50Flat-rolled steel sheets, hot-rolled, of a length of 240 inches, of a width of 84 inches, with a thickness of 11GA, and grade of SAE J403GR1010
28.47209.16.00.90Flat-rolled products of iron or non-alloy steel, of a width of at least 600 mm, cold-rolled not clad, plated or coated, in coils, not further worked than cold-rolled, with a thickness of at least 1 mm but not exceeding 3 mm, with zinc aluminum magnesium coating
297209.18.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of less than 0.5 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070
307210.12.00Tinplate sheets of dimensions 28.5 inches × 28.875 inches, 30 inches × 30 inches or 34.875 inches × 34.875 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed)
30.17210.61.00Flat-rolled steel, in coils, of specification CSA G401-24, of a thickness of 1.6, 2.0 or 2.8 mm, of a width of 690 mm, 692 mm or 863 mm, with an aluminium and zinc coating of 1.0 ounce per square feet
317210.69.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated with aluminum, other than with aluminum-zinc alloys
327210.70.00Flat-rolled products of iron or non-alloy steel, with a width of 600 mm or more, painted, varnished or coated with plastic
337210.90.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated: PVC coated metal sheets that have all of the following characteristics:
  • Grade: G90
  • Specification: ASTM A653-23-CS, type B
  • Thickness/diameter: 24 gauge steel
  • Width: 96 inches
  • Length: 48 inches
  • Coating: 20 mil (0.5 mm) Duradek PVC film
33.17211.29.00

  • (a) Flat-rolled products of iron or non-alloy steel, cold-rolled, not clad, plated or coated, of a thickness not exceeding 0.0098 inch, of a width not exceeding 23.625 inches, of grade AISI 1045, 1050, 1055, 1067 to 1070, or 1075, of specification ASTM A682 or ASTM A684;

  • (b) Flat-rolled steel strips, cold-rolled and annealed, of high-carbon SAE 1095 spring steel, of a thickness of 0.9 mm, of a width of 500 mm

347212.10.00Tinplate coil of a length of 3 inches, 4.625 inches, 6.3125 inches, 11.3 inches or 16 inches, with a thickness of 0.0135 inches, coated with up to 0.25 pounds of tin on both sides, of specification ASTM A623 or A624 (Material T1, batch annealed)
34.017214.91.00Continuous cast iron bars, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling, of grade 65-45-12, 65-40-18, or 60-55-06, with rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches
34.027214.99.00

  • (a) Continuous cast iron bars of grade 65-45-12, 65-40-18, 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch up but not exceeding 20 inches, with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches, a length of at least 2 inches but not exceeding to 40 inches;

  • (b) Special quality bars and rods of non-alloy steel, not further worked than forge, hot-rolled, of a diameter of at least 1 inch but not exceeding 10 inches, of grade 1018, 1020, 1022, 1040, 1045, 1055, ASTM105, ASTM108, ASTM350, ASTM36, or SA105 (VAR- vacuum degassed)

34.037215.10.00.90

  • (a) Bars and rods of free cutting steel, cold formed, of a diameter of 1.46 inches, of grade B 1018;

  • (b) Bars and rods of free cutting steel, cold formed, of a diameter of 1.312 inches, of grade 10B21;

  • (c) Bars and rods of free cutting steel, cold formed, of a diameter of 1 inch, of grade SAPH P and 1022;

  • (d) Bars and rods of free cutting steel, cold formed, of a diameter of 1.078 inches, of grade 1022

34.047215.50.00

  • (a) Bars and rods of cast iron, continuous, not further worked than cold-formed or cold-finished, of grade 65-45-12, 65-40-18 or 60-55-06, with a circular cross-sectional diameter of at least 0.5 inch but not exceeding 20 inches, or with a rectangular cross-section of a width of at least 1 inch but not exceeding 20 inches and a length of at least 2 inches but not exceeding to 40 inches;

  • (b) Bars, cold-rolled, of grade C1018 or C1045, of a thickness of at least but not exceeding 4 inches, of a length of 20 feet;

  • (c) Bars, cold-rolled of grade C1045, of yield of 90 ksi, of a thickness of 2-1/8 inches, of a length of 20 feet

34.057215.90.00Other bars and rods of iron or non-alloy steel
34.067216.32.00I sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
34.077216.33.00H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
34.087219.11.00Flat-rolled products of stainless steel, not further worked than hot-rolled, in coils, of specifications ASTM, ASME, or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.097219.12.00Flat-rolled products of stainless steel, not further worked than hot-rolled, in coils, of specifications ASTM, ASME, or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.17219.13.00Flat-rolled products of stainless steel, not further worked than hot-rolled, in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.117219.14.00Flat-rolled products of stainless steel, or more, not further worked than hot-rolled, in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of less than 3 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches
34.127219.21.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 10 mm, of a width of 36 inches, 48 inches, 60 inches, or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.137219.22.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.147219.23.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.157219.24.00Flat-rolled products of stainless steel, not further worked than hot-rolled, not in coils, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of less than 3 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.167219.31.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a thickness of at least 4.75 mm, of a width of 36 inches, 48 inches, 60 inches, or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.177219.32.00Flat-rolled products of stainless steel, not further worked than cold-rolled (cold-reduced), of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PHor 310/310S, of a thickness of at least 3 mm but not exceeding 4.75 mm, of a width of 36 inches, 48 inches, 60 inches or 72 inches, of a length of at least 60 inches but not exceeding 400 inches
34.187219.33.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness exceeding 1 mm but less than 3 mm
34.197219.34.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm
34.27219.35.00Flat-rolled products of stainless steel, of a width of 600 mm or more, not further worked than cold-rolled (cold-reduced), of a thickness of less than 0.5 mm
34.217220.11.00Flat-rolled products of stainless steel, of a width of less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more
34.227220.20.00.90Type 436 Flat-Rolled, Stainless Steel Coil, with a thickness of 0.5 mm, of a width of 324.0 mm, with black flouropolymer laminate coating
34.237220.90.00Flat-rolled products of stainless steel, of a width of less than 600 mm, other
34.247221.00.00Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PH or 310/310S, of a width of at least 0.125 inch but not exceeding 12 inches, of a length of at least 96 inches but not exceeding 400 inches
34.257222.11.00Bars and rods of stainless steel,of grade SCF-19, P550, P690, P580, 1515- HS, NMW 140 or 17-4, of a thickness of at least 3 inches but not exceeding 20 inches, of a length of 30 feet
34.267222.20.00Bars and rods, not further worked than cold-formed or cold-finished
34.277222.30.00Bars and rods of stainless steel, other
34.287222.40.00Angles, shapes and sections of stainless steel, angles, shapes and sections, of specifications ASTM, ASME or NACE, of grade 304/304L, 316/316L, 2205 Duplex, 17-4 PHor 310/310S, of a width of at least 0.125 inches but not exceeding 12 inches, of a length of at least 96 inches but not exceeding 400 inches
357225.11.00Silicon-electrical steel, grain-oriented, of a width of 600 mm or more
367225.19.00Flat-rolled products of silicon-electrical steel, of a width of 600 mm or more, other than grain-oriented
377226.11.00Silicon-electrical steel, grain-oriented, of a width of less than 600 mm
387226.19.00Silicon-electrical steel, non-oriented, of a width of less than 600 mm
38.017227.10.00Bars and rods, of special bar quality, of other alloy steel (other than stainless steel), hot-rolled, in irregularly wound coils, with a diameter of at least 1 inch but not exceeding 10 inches, drawn or extruded of grades ASTM588, ASTM350 or SA350 (VAR- vaccum degassed)
38.027228.30.00Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
38.037228.40.00.90Alloy steel forged bars and rods, vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of grade AISI4130, 4140,4340, or 8620, of specifications ASTM A29, ASTM A322, ASTM A304 or ASTM A108, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches
38.047228.50.00

  • (a) Steel bar, of grade Aerospace M50 NIL VIM/VAR, Aerospace 52100 VIM/VAR, Aerospace 440C VAR or Aerospace 4340 VAR, of technical specifications AMS 6278, AMS 6491, AMS 6490, AMS 5618, AMS 6440, AMS 6444, AMS 6414 or AMS 6415, of specifications GE -B50TF347, PWA36140, EMS52526, B50TF346, P29TF48, CPW54, CPW378, MSRR6083, EMS83060, EMS52491, CAFM/L-01-119, DMD0119.20, EMS52494 ,PWA723, CPW52, EMS52493, EMS56627 or EMS83060, of a thickness of at least 0.5 inch but not exceeding 12 inches, with a length of 14 feet;

  • (b) Bars and rods, of alloy steel other than stainless steel, maraging steel 250M & 300M, not further worked than cold-formed or cold-finished, of grade H13, modified 4340, or 4330, with a circular cross-sectional diameter of at least 1 inch but not exceeding 10 inches or with minimum dimensions of 10 inches height, 20 inches width and 16 inches length and maximum dimensions of 14 inches height, 28 inches width and 40 inches length for rectangular bars

38.057228.50.00.90

  • (a) Alloy steel bars and rods, cold formed or cold finish, of grade 4130, 4140, 4150, 4320, 4330, 4340, 52100, 8620, or 9310; vacuum degassed, annealed or quenched and tempered, or normalized and tempered, of specifications ASTM A29, ASTM A322, ASTM A304, ASTM A108, with a circular cross-sectional diameter not exceeding 8 inches or a rectangular cross-sectional thickness not exceeding 4 inches;

  • (b) Round bars of uncoated alloy steel, of grade 4140, with an annealed cold finish, with a diameter of 1 inch, with a length of 144 inches

38.067228.60.00Bars or rods, of alloy steel, hot rolled or rough turned, vacuum degassed, annealed or quenches and tempered, or normalized and tempered

  • (a) of grade 4130, other specification ASTM A20, with a circular cross-sectional diameter of less than 8 inches or a rectangular cross-sectional thickness of less than 4 inches;

  • (b) of grade AISI 4130, 4140, or 4150, of specifications ASTM A29, ASTM 322, ASTM A304, or ASTM A108

38.077304.19.00Hydraulic line tube, of carbon steel, grade C1026, pressure rated at 3000 PSI, with 1.25 inch outer diameter by 0.120 inch wall thickness, of a length of 72 inches, zinc-plated
38.087304.90.00Hydraulic line tube, carbon steel grade C1026, pressure rated at 3000 PSI, with outer diameter 1-1/4 inches and wall thickness 0.120 inch, available in lengths of 24 inches, 30 inches ,60 inches, 90 inches, and 120 inches, ends fitted with male-male JIC connections, size 1-5/16 inch (thread outside diameter), zinc plated
38.097306.29.00.49Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter not exceeding 60.2 mm
38.17306.29.00.59Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter of 60.3 mm
38.117306.29.00.69Tubing of iron or steel, of a kind used in drilling for oil or gas, of an external diameter exceeding 60.3 mm but not exceeding 73 mm
38.127306.29.00.79Tubing of iron or steel, of a kind used in drilling for oil or gas of an external diameter exceeding 73 mm
38.137306.30.00In-line galvanized steel tubes, of high strength yield and customized tensile properties, with a thickness of at least 0.71 mm but not exceeding 4.57 mm, of specification ASTM A-1057
38.147306.30.00.41Tubes of carbon steel, drawn over mandrel, of grade 1026, of specifications ASTM A513, ASTM A106 or ASTM A519
38.157306.30.00.49

  • (a) Tubes of carbon steel, drawn over mandrel, of grade 1026, of specifications ASTM A513, ASTM A106 or ASTM A519;

  • (b) Steel tubes, drawn over mandrel, of specification ASTM A513, of grade 4130, of an outside diameter of 1.25 inches with a wall thickness of 0.250 inch or of an outside diameter of 3.0 inches with a wall thickness of 0.312 inch;

  • (c) Steel tubes, drawn over mandrel, of grade 4130, of specification A513, with the following dimensions:

    • (i) 1.375 inches of diameter by 0.188 inch of wall thickness,

    • (ii) 1.625 inches of diameter by 0.25 inch of wall thickness,

    • (iii) 1.76 inches of diameter by 0.193 inch of wall thickness;

    • (iv) 2.0 inches of diameter by 0.188 inch of wall thickness,

    • (v) 2.0 inches of diameter by 0.25 inch of wall thickness,

    • (vi) 2.125 inches of diameter by 0.188 of wall thickness,

    • (vii) 2.25 inches of diameter by 0.188 inch of wall thickness,

    • (viii) 2.25 inches of diameter by 0.25 inch of wall thickness,

    • (ix) 2.375 inches of diameter by 0.2 inch of wall thickness,

    • (x) 2.625 inches of diameter by 0.25 inch of wall thickness,

    • (xi) 2.75 inches of diameter by 0.187 inch of wall thickness,

    • (xii) 3 inches of diameter by 0.25 inch of wall thickness,

    • (xiii) 3.25 inches of diameter by 0.375 inch of wall thickness,

    • (xiv) 3 inches of diameter by 0.285 inch of wall thickness,

    • (xv) 3.375 inches of diameter by 0.281 inch of wall thickness,

    • (xvi) 3.625 inches of diameter by 0.281 inch of wall thickness,

    • (xvii) 3.875 inches of diameter by 0.313 inch of wall thickness

38.167306.30.00.51Round steel tubes, of an outside diameter of at least 1.0 inch but not exceeding 4.5 inches, with a coating of G120 hot-dipped galvanized zinc base coat, conversion coating and clear finish coating, with a wall thickness of at least 0.138 inch but not exceeding 0.153 inch
397306.30.00.89

  • (a) Other tubes, pipes and hollow profiles of iron or steel, welded, of circular cross-section, of iron or non-alloy steel, that have all of the following characteristics:

    • Grade: 1008, 1010, 1015 or 1020
    • Yield/tensile strength: 40 000 psi yield / 45 000 psi tensile, 45 000 psi yield / 48 000 psi tensile or 50 000 psi yield / 55 000 psi tensile
    • Specification: ASTM A500 or A513
    • Diameter: 0.5 to 5 inches
    • Coating: in-line galvanizing process utilizing a triple layer of protection (first, a 99.99% pure SHG zinc coating is applied to the surface, followed by a conversion coating and a clear organic topcoat that seals the surface and produces a smooth, shiny finished product)

  • (b) Steel tubes, honed, of specification ASTM 513 Type 5, of an outside diameter of at least 1.875 inches but not exceeding 2.375 inches and an inside diameter of at least 1.500 inches but not exceeding 2.003 inches, with a minimum yield strength of 75 ksi;

  • (c) Steel tubes, drawn over mandrel, of specification ASTM 513 Type 5, of an outside diameter of at least 2.375 inches but not exceeding 2.625 inches and an inside diameter of at least 1.984 inches but not exceeding 2.241, with a minimum yield strength of 75 ksi

39.17306.61.00Galvanized steel tubes, of square or rectangular cross section, of high yield strength and customized tensile properties, thickness of at least 0.89 mm but not exceeding 4.57 mm, with triple layer galvanized paint coating on the inside, an interior zinc paint coating, and an exterior hot-dip galvanized coating, of specification ASTM A-1057
407306.61.00.39

  • (a) Other tubes, pipes and hollow profiles of iron or steel, welded, of square or rectangular cross-section, that have all of the following characteristics:

    • Grade: 1008, 1010, 1015 or 1020
    • Yield/tensile strength: 40 000 psi yield / 45 000 psi tensile, 45 000 psi yield / 48 000 psi tensile or 50 000 psi yield / 55 000 psi tensile
    • Specification: ASTM A500 or A513
    • Thickness: 0.625 to 4 inches (12 and 14 gauge)
    • Coating: in-line galvanizing process utilizing a triple layer of protection (first, a 99.99% pure SHG zinc coating is applied to the surface, followed by a conversion coating and a clear organic topcoat that seals the surface and produces a smooth, shiny finished product)

  • (b) Other tubes, pipes and hollow profiles of iron or steel, welded, of square cross-section, that have all of the following characteristics:

    • Grade: 50 or better
    • Specification: ASTM A1011
    • Dimensions: 1.5 inches × 1.5 inches, 1.75 inches × 1.75 inches, 2.00 inches × 2.00 inches, 2.25 inches × 2.25 inches or 2.5 inches × 2.5 inches
    • Coating: galvanizing that meets ASTM A653
40.17307.21.00Welded stainless steel fasteners (“weld studs”), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm
40.27307.91.00Welded mild steel fasteners (“weld studs”), cold-forged, threaded or unthreaded, tapped, flanged or unflanged, of a diameter of at least 2 mm but not exceeding 10 mm
417307.92.00Threaded elbows, bends and sleeves, of specification API 5CT - Semi Premium
427307.99.00

  • (a) Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel, of specification GBCD-Butt, GBCD-EHTQ, GBCD-Slim Hole, Rattler, TCBC or BTB; or

  • (b) Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel, that have all of the following characteristics:

    • Grade: L80 or P110
    • Specification: API 5CT - Semi Premium
    • Outside Diameter: 4.500 to 9.625 inches
    • Dimensions: per API 5CT
437308.10.00Bridges and bridge-sections, of iron or steel
43.17308.30.00.28Motor-operated (gear head) rolling industrial galvanized steel service door, of specification ASTM 653, with coating of galvanized zinc or zinc-iron alloy (galvannealed) by hot-dip process, with slat and hood finish
43.27308.90.00.95Grills, air diffusers or ducts of iron or steel
43.37309.00.00Reservoirs, tanks, vats and similar containers for any material other than compressed or liquefied gas, of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
43.47310.10.00Reconditioned or remanufactured 55 US gallon steel drums, of specification UN recertified, both tighthead and openhead
447310.21.00Cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulted, but not fitted with mechanical or thermal equipment
44.017310.29.00.20Cans, other than cans which are to be closed by soldering or crimping, of iron or steel, of a capacity of less than 50 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
44.027311.00.00Containers for compressed or liquefied gas, of iron or steel
44.037312.10.00Stranded wire, ropes, and cables, of iron or steel, not electrically insulated
44.047314.20.00Modular welded wire mesh security walls of steel, with steel tube posts and hinged doors, powder-coated finish
44.057317.00.00Nails of iron or steel, certified for steel and metal manufacturing construction, of a diameter of at least 4 mm but not exceeding 1 inch, coated or uncoated
44.067318.15.00

  • (a) Welded metal fasteners, “Weld Studs”, cold forged or hot forged, threaded or unthreaded, headed or unheaded, tapped, with or without a collar, flanged and un-flanged, with diameter of at least 2 mm but not exceeding 32 mm;

  • (b) Insulation fasteners and weld pins for HVAC ductwork and insulation installation

44.077318.15.00.45

  • (a) Double-ended stud, of standard M8, with thread pitch of 1.25 mm and length of 37 mm, with external 6-lobe drive and 17.5 mm header point, with acid treatment and zinc or nickel coating;

  • (b) Double ended stud, of standard M8, with a thread pitch of 1.25 mm and length of 25 mm, pan head serrated neck, of grade 10.9, zinc coating;

  • (c) Double ended stud, of standard M6, with a thread pitch of 1.00 mm, of grade 10.9, with zinc coating;

  • (d) Projection weld stud of standard M8, with a length of 30 mm, with zinc coating;

  • (e) Round-interior studs, of standard M6, with a diameter of 18.75 mm, with a rod diameter of 0.3050 inch, plain coating;

  • (f) Studs, of M6 standards, with a 23.75 mm head diameter, with a 1.5 mm thread pitch, with a 25 mm length, with a rod diameter of 0.3450 inch

  • (g) Studs, of M6 standard, of 18.97 mm head diameter of the stud, with a thread pitch of 1.0 mm, with a length of 21 mm, with a rod diameter of 0.3050 inch;

  • (h) Studs, of M6 standard, with 18.97 mm head diameter, with a 1.0 mm thread pitch, with a length of 20 mm length, with a rod diameter of 0.3050 inch

44.087318.15.00.49

  • (a) Bolts, flange head, self-tapping, of standard M10, with a thread pitch of 1.5 mm and a length of 30 mm, meeting GM6202M, with a thread-forming surface treatment;

  • (b) Socket bolts, of standard M12, with a thread pitch of 1.75 mm and a length of 120 mm, of grade 8.8, with a corrosion-protective surface treatment, meeting automotive specifications;

  • (c) Clinch pins, of steel grades SAE 10B21 or 10B22, of 6 mm diameter and 12.5 mm length, with zinc-plated coating for corrosion protection;

  • (d) Bolts, hex flange, of standard M12, with a thread pitch of 1.75 mm and a length of 80.0 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating;

  • (e) Bolts, hex flange, of standard M12, with a length of 120 mm, of property class 10, with a corrosion-protective aluminum-organic surface coating

44.097318.16.00.90

  • (a) Hex nuts, of projection weld type, of standard M12, with a thread pitch of 1.25 mm, of grade 8 steel, with a bare surface and rust-inhibitor treatment;

  • (b) Weld studs, of standard M6, with dimensions M6 by 1.0 mm by 16 mm, of specification GMW25M (8.8) with a maximum carbon content of 0.26% and plain coating;

  • (c) Studs, projection-weld, of standard M6, with a thread pitch of 1.0 mm, with a length of 25 mm, of specifications GMW25M

  • (d) Studs, projection weld type, of standard M6, of 1.0 mm thread pitch and 20 mm length, of property class 8.8;

  • (e) Weld hex nuts , of standard M8, of 1.25 mm thread pitch, with head diameter of 22.5 mm, of 0.590 inch wire rod

44.17318.21.00Washers or retaining washers used in conjunction with “weld studs” or “weld pins” , with inside diameters of at least 1.6 mm but not exceeding 6 mm
44.117326.19.10Flanged wellhead tubing heads and flanged casing head spools, in the rough, for use in the manufacture of wellhead tubing heads or casing head spools
44.127326.19.90Other articles of iron or steel, forged or stamped, but not further worked, other than grinding balls and similar articles for mills
44.137326.90.90.90Welded metal fasteners, “weld studs”, of mild or stainless steel; cold forged, hot forged, threaded or unthreaded, headed or un-headed, tapped, with or without a collar, flanged or un-flanged diameters of at least 2 mm but not exceeding 32 mm
44.147601.20.00Round bars of aluminum alloy, forge quality, of a diameter of at least 1 inch but not exceeding 12 inches, of grade 2014, 2219, 6061, 7075, or 7175, of specifications SAE-AMS-QQ-A-367 and QQ-A-225
44.157601.20.00.90Aluminium alloys scrap ingot of casting alloys 380 or 390
457606.12.00

  • (a) Aluminum coils, with a thickness of 0.0106 to 0.018 inches, with a width of 1.165 to 10.7086 inches, with a polyester or epoxy laminate, of alloys 5352 and 5042;

  • (b) Aluminum sheets coated with an electron beam cure, with a thickness of 0.045 inches, in sheets of 49 inches × 97 inches; or

  • (c) Aluminum plates, sheets and strip, of alloy AA1350 of a thickness exceeding 0.2 mm but less than 7 mm

45.017606.12.00.12Aluminum plates, sheets and strip, rectangular (including square), of aluminum alloys, not clad, of a thickness of 7 mm or more
45.027606.12.00.20

  • (a) Flat-rolled aluminum coils, of alloy 5182 H24, of a thickness of 0.85 mm and a width of 194.3 mm, with a black fluoropolymer laminate coating;

  • (b) Flat-rolled aluminum coils, uncoated, of alloy 3104, of a nominal format equivalent to 355 mL or 473 mL, of a thickness of at least 0.254 mm but not exceeding 0.259 mm, of a width of at least 1454 mm but not exceeding 1735.2 mm;

  • (c) Flat-rolled aluminum coils, of alloy 3104, suitable for downstream forming and coating, uncoated, of a nominal format equivalent to 473 mL, with a thickness of at least 0.254 mm but not exceeding 0.259 mm, of a width of 1735.2 mm

45.037608.20.00Aluminum tubes or pipes of aluminum alloys, cylindrical shape, seamless, of grade AA6101 or AA6063, of specification ASTMB241 or ASTMB317, with a wall thickness of at least 0.109 inch but not exceeding 0.500 inch, of an outer diameter not exceeding 10 inches,of a length of at least 5 feet but not exceeding 40 feet
45.047609.00.00

  • (a) Self locking vane and rail system in 2 or 4 inch configurations used to redirect airflow in HVAC ductwork;

  • (b) Adjustable elbows for round HVAC ductwork;

  • (c) Flexible duct connector to reduce vibration transmission in HVAC ductwork;

  • (d) HVAC ductwork components allowing for branching off main HVAC ductwork;

  • (e) Straight flange and cleat system including integrated mastic for joining HVAC ductwork;

  • (f) Rolled or stamped angle rings for connecting round HVAC ductwork

45.057610.10.00Rolling steel fire door; aluminum construction with extruded aluminum rails, side lock, commercial grade hardware, 2 inch or 3 inch ten ball bearing rollers and galvanized 11 gauge hinges
45.067610.90.90.90Aluminium structures designed to cover reservoirs, tanks and bulk material storage facilities
45.077616.10.00Welded aluminum fasteners, “weld studs”, cold forged, threaded or unthreaded, flanged or un-flanged, of a diameters of at least 2 mm but not exceeding 16 mm
45.087616.99.90Monitor and tablet mounts and parts thereof, including rail mounts, monitor mount bases, of cast aluminum, suitable for agricultural use
45.098207.13.00Rock drilling or earth boring tools with working part of cermets, and bits and parts
45.18207.19.00Drill bits, drill bit bodies, rock drilling and earth boring tools, including parts
45.118308.20.00Welded metal refractory fasteners of mild steel or stainless steel, “refractory anchors”, cold forged or hot forged, unthreaded, headed or unheaded, tapped, with or without a collar. stamped, formed, cut, flanged or un-flanged, of a diameter of at least 2 mm but not exceeding 19 mm
45.128309.90.00

  • (a) Aluminum food can easy open ends;

  • (b) Steel metal closures, inside surface includes a polyester coating, of technical specifications ASTM T2, T3, T4, T5, DR7.5, or DR8, in nominal diameters of 38 mm, 40 mm, 48 mm, 58 mm, 63 mm, 70 mm, or 82 mm;

  • (c) Steel food can ends and lids, including those made from tinplate (steel coated with a thin layer of tin) or tin-free steel (electrolytic chromium-coated steel, ECCS), lined or unlined with a food-safe polymer coating

45.138311.30.00Solder, welding wire, braze discs and coated braze rods
45.148418.69.90.80Refrigeration units, of a kind used for trucks, trailers or vans
45.158425.42.00Hydraulic jacks customized for above ground tanks
468517.69.00Machines for the reception, conversion and transmission of voice: talk through units (TTU) that are UL-listed and designed to be mounted on a countertop or window to allow for communication through glass or another barrier
Previous Version

SCHEDULE 3(Section 4.1 and subparagraph 5(a)(ii))

Goods

Column 1Column 2Column 3
ItemTariff Classification NumberGoodsExpiry date
17209.16.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness exceeding 1 mm but less than 3 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070March 13, 2026
27209.17.00Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not further worked than cold-rolled or cold-reduced, not clad, plated or coated, in coils, of a thickness of at least 0.5 mm but not exceeding 1 mm, of specification ASTM 1045, 1050, 1055 or 1067-1070March 13, 2026
37211.23.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, containing by weight less than 0.25% carbon, of specification ASTM 1045, 1050, 1055 or 1067-1070March 13, 2026
47211.29.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled or cold-reduced, other, of specification of ASTM 1045, 1050, 1055 or 1067-1070March 13, 2026
57304.41.00Alloy 800 stainless steel cylindrical shape seamless tubes, cold drawn with a wall thickness of at least 0.054 inch but not exceeding 0.109 inch, with outer diameter 0.50 inch, 1.00 inch or and 1.25 inches and length of at least 215.38 inches but not exceeding 675.00 inchesApril 17, 2025
67308.90.00

  • (a) Redirective, non-gating crash cushion assembly consisting of high molecular weight/high density polyethylene (HMW/HDPE) energy-absorbing cylinders mounted on a self-contained or concrete backup structure;

  • (b) Gating, flared end terminal system for roadside W-beam guardrail applications, in 6-post and 8-post configurations;

  • (c) Tangent end-terminal for W-beam guardrail systems, consisting of galvanized steel components, including guardrail sections, extruder head, hardware, and posts

March 5, 2027
77308.90.00.99Redirective, non-gating crash cushion assembly to shield fixed roadside objects, consisting of a modular framework of steel beam panels enclosing a series of crushable energy-absorbing cartridges and a self-supporting plastic noseMarch 5, 2027
87318.16.00.85

  • (a) Weld nut with high-flange, for metal applications, with steel grade of 10, with metric thread sizes of 10 mm, and coating of polytetrafluoroethylene;

  • (b) Weld nut with high-flange (projection weld) for metal applications, with steel grade of 10, with metric thread sizes of at least 8 mm but not exceeding 12 mm, with coating of polytetrafluoroethylene

April 2, 2026
97606.12.00.11H21 recycled aluminum coil, conversion coated on both sides and a thickness of 0.027 inchMarch 5, 2027
Previous Version

SCHEDULE 4(Section 4.2 and paragraph 5(a.1))

Goods

Column 1Column 2Column 3Column 4
ItemBusiness NumberTariff Classification NumberGoodsConditions
1100326198NP00044407.14.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of hem-fir (Western hemlock) (Tsuga heterophylla) and fir (Abies spp.)
4407.19.00Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, untreated structural timbers of other coniferous species
21008506350813.50.00Mixed nuts, in shell, consisting of almonds, walnuts, hazelnuts, and pecans
2008.19.90

  • (a) Pecans, blanched, dried, roasted, and glazed;

  • (b) Walnuts, small pieces, blanched, dried, and glazed, of a size of 5/16 inch or less

3101569663RM00021006.30.00.91Semi-milled or wholly milled long grain white rice, whether or not polished or glazed
4101803575RM00014012.90.90.30Tire treadsImported for sale to company with business number 122644537
5101928125RM0802.99.00Raw pecans, chopped
6101963361RM00014409.29.10Unfinished solid white oak wood boards, either quarter sawn or live sawn, with tongue and groove edges, with plank widths of at least 4 inches but not exceeding 10 inches, for further processing into custom-finished wood flooring
4409.29.90Unfinished solid Hickory (Carya ovata) wood boards, live sawn, with tongue and groove edges, plank widths of at least 4 inches but not exceeding 6 inches, for further processing into custom-finished wood flooring
7103609160RM00014202.92.90Holster of molded plastic with or without a spare cartridge for handheld conducted energy devices
6211.33.00Training suit made up of hook and loop panels, designed for use with handheld conducted energy device training cartridges that deploy hook-and-loop fastener darts
8517.62.00

  • (a) Six bay dock for handheld conducted energy devices;

  • (b) Single bay dock for handheld conducted energy devices

9304.00.90Handheld conducted energy devices
9306.30.90Cartridges for handheld conducted energy devices formed from plastic, containing metal probes connected to 25 inches wires that are deployed by a compressed nitrogen charge
8104275359RT00014819.10.00Corrugated packaging and raw materials used for further processing into specific packaging
9104671094RT00078307.10.00Imported for sale to company with business number 872894332
8418.50.10Imported for sale to company with business number 872894332
8419.81.00.20Imported for sale to company with business number 872894332
8419.81.00.90Imported for sale to company with business number 872894332
9403.20.00.99Imported for sale to company with business number 872894332
10104813662RM00011006.30.00Semi-milled or wholly milled rice, whether or not polished or glazed, of the following types:

  • (a) sweet rice;

  • (b) long grain rice;

  • (c) white parboiled rice

11105604938RM00018418.50.10Imported for sale to company with business number 872894332
12121054431RM00018516.50.00Imported for sale to company with business number 872894332
9403.20.00.20Imported for sale to company with business number 872894332
13121478390RC00014823.69.00.90Custom paperboard trays
14122463953RM00018418.69.90Imported for sale to company with business number 872894332
8419.81.00.90Imported for sale to company with business number 872894332
151225745853925.90.00.20Polymer matrix of high-density polyethylene netting, of specification ASTM D-638, with 0.100 inch thick strands and 0.150 inch spacing between strands, of a roll length of at least 100 feet but not exceeding 150 feet, of a roll width of at least 12 inches but not exceeding 60 inchesImported for sale to the Ontario Ministry of Transportation (MTO)
16128522992BN00018309.90.00Can lids
17133405829RP00011701.14.00Organic light brown sugar
1701.99.90.30Finely milled organic cane sugar, blended with organic starch
1703.10.90

  • (a) Organic molasses;

  • (b) Organic light molasses;

  • (c) Fancy molasses

18133586628RM00018309.90.00Stoppers, caps and lids of base metal
19140851943RC00034408.90.00Veneer sheets, of conifers, of a thickness of 1.6 mm or 2.1 mm
20143460764RM00014407.11.00.23Green and dry wood, sawn boards, of white pine, of grade stained, clear, premium, or select, of a width of at least 3 feet but not exceeding 10 feet, of a length of at least 4 feet but not exceeding 16 feet
21718866494RP00013918.90.10Ethylene vinyl acetate/polyethylene (EVA/PE) foam sheet, with a thickness of 6 mm, with a width of 40 inches and length of 80 inches, with high-performance pressure-sensitive adhesive (PSA 9077) coating
22731056107RT00018806.23.00Unmanned aircraft, for remote-controlled flight only, with maximum take-off weight at least 7 kg but not exceeding 25 kgGoods imported to fulfill contract CW2384495
23770095529RM00018418.69.90Imported for sale to company with business number 872894332
247768532859506.91.00.90Articles and equipment for general physical exercise
25802556332RM00014819.20.00Non-corrugated cardboard boxes with pre-printed graphic design
26805038247RT00014408.90.00Green wood, veneer, of red alder, white oak, douglas fir, or douglas fir VG, of a width of at least 5.5 feet but not exceeding 12 feet, of a length of at least 86 feet but not exceeding 144 feet, of premium slicing grade
27810199612RM00011806.90.90.19Chocolate chips of the following types:

  • (a) 53% dark chocolate;

  • (b) milk chocolate;

  • (c) butter scotch flavoured;

  • (d) semi-sweet;

  • (e) caramel flavored

Imported for sale to company with business number 137466199 RT0001 or 122235922RT0001
28824659155RM00011302.19.00.90Konjac flour, of grade G4
29825387335RT00010805.10.00Fresh oranges
0805.40.00Fresh grapefruit
0805.50.00Fresh lemons and limes
308276225494407.91.00.11Green and dry wood, sawn boards, of red oak, of grade 3A, of a thickness of 1 inch, of a width of at least 4 inches but not exceeding 30 inches, of a length of at least 4 feet but not exceeding 16 feet
4407.91.00.91Green and dry wood (sawn boards) of white oak, of grade 1C of a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of at least 4 feet but not exceeding 16 feet
4407.99.00Green and dry wood (sawn boards) of hickory or walnut, of grade 1C, with a thickness of 1 inch (4/4), with a width of at least 4 inches but not exceeding 30 inches, with a length of 4 feet but not exceeding 16 feet
4411.13.00.90Medium-density fiberboard, of a thickness of at least 5 mm but not exceeding 9 mm, of a width of at least 4 feet but not exceeding 16 feet, of a length of at least 4 feet but not exceeding 30 feet
31833044035RC00010805.10.00.10Oranges (Valencia variety), maximum size 110 mm, minimum size 60 mm
0805.22.00Clementines (Corsica variety), certified organic, maximum size 70 mm, minimum size 45 mm
0805.40.00.10Pink grapefruit, maximum size 110 mm, minimum size 70 mm
0805.50.00Lemons (Eureka variety) and limes (Latifolia variety), certified organic, with a maximum size 110 mm for lemons and 70 mm for limes, and a minimum size of 55 mm of lemons and 45 mm for limes
32843741349MC00024407.91.00Wood of oak rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)
4407.93.00Wood of maple rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)
4407.97.00Wood of poplar and aspen rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)
4407.99.00Wood rough sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm, kiln dried, of a length of at least 8 feet but not exceeding 16 feet, of nominal sizes 4/4 (1 inch), 5/4 (1.25 inches), 6/4 (1.5 inches) and 8/4 (2 inches)
33844690347RM00016307.90.99.90First aid tourniquet, one-handed application, consisting of a textile strap with a windlass (plastic or aluminum) or ratcheting self-locking mechanismFrom March 4, 2025 to July 31, 2025, for imports for sale to York Region Community and Health Services. or from March 4 to April 30, 2026, for imports for sale to Government of Saskatchewan
34849922893RT00011006.30.00Semi-milled or wholly milled rice, whether or not polished or glazed
35858245772RM00018419.81.00.90Imported for sale to company with business number 872894332
36864676531RM00018419.81.00Imported for sale to company with business number 872894332
8516.72.90Imported for sale to company with business number 872894332
3787965143RM00011902.19.23.30Unprepared pasta of the following types:

  • (a) 1.125 inch heavy wall elbow;

  • (b) 1.15 inch mafalda;

  • (c) 1.25 inch ribbons;

  • (d) 1.25 inch penne rigate;

  • (e) 1/2 cut cavatappi;

  • (f) mini rigatoni;

  • (g) 1.5 inch rotini

38891093452RM00013924.10.00Imported for sale to company with business number 872894332
9403.70.90Imported for sale to company with business number 872894332
39891577132RT0010207.14.91Boneless or bone in frozen chicken cuts and offal
1602.32.93Frozen cooked or processed chicken parts, bone in or boneless
40892695016RC00018418.69.90.70Refrigeration condensing units
41893039321RM00013923.21.90.90Printed polyethylene bags with a bottom gusset, butterfly vents and laser perforation
4819.20.00.90Cartons, boxes and cases, folding, of non-corrugated paper or paperboard
42893736447RC00031006.30.00Non-aromatic rice varieties of either long or medium grain, without additives
438946341123925.10.00.00Imported for sale to company with business number 887258960
8418.69.90.40Imported for sale to company with business number 887258960
8516.10.90Imported for sale to company with business number 887258960
44896297645RM00013925.10.00Agricultural water tanks, of medium-density polyethylene with UV inhibitors, with translucent walls for level visibility and US gallon indicators, designed for liquids with a specific gravity of up to 1.7 relative to water at 4°C, equipped with polymer baffles for fluid control, with molded-in legs and band locators for tie-down, of a capacity of 3250 US gallons, 3750 US gallons or 4250 US gallons
45898667639RM00018202.31.00

  • (a) Circular, scalloped, saw blades for high-speed circular saws, with a heat-traded steel body, with an outside diameter of 10 inches, rated for operating speeds up to 5,000 rpm;

  • (b) Reinforced abrasive cut-off wheel for high-speed circular saws, with an outside diameter of 14 inches, rated for operating speeds up to 5,000 rpm

8205.59.90Snap to connect release forks, deburring blades, swivel sockets and hose pusher bars of chrome‑plated high‑carbon steel, for hydraulic service
8207.20.00Two‑piece collet sets of hardened alloy‑steel cages, for positive-stop crimping tools, designed for nominal diameters of at least 1/4 inch but not exceeding 2 inches, with precision spacer rings
8207.30.00.20Heavy‑duty collets and spacer rings of hardened high-alloy steel, for four‑wire spiral hoses and fittings, of sizes rated for crimp forces achieving at least 35 mm but not exceeding 42 mm, rated for operating crimp pressures of approximately 62 MPa
8207.30.00.90 Ancillary crimp tooling including die rings, adapters, storage cages, pusher blocks, used in hydraulic crimping operations, of through‑hardened high‑alloy tool steel
8208.20.00Circular cutting media for hydraulic‑hose preparations, with 7 inch or 14 inch diameter blades and reinforced cut‑off wheels, high‑speed‑steel bodies with hollow‑ground, scalloped teeth or bonded‑abrasive rims, and 25.4 mm arbor hole, compatible with industrial hose-cutting saws
9403.20.00.99Powder‑coated mild‑steel storage for crimp tooling and hose assembly components, with a 15‑drawer die‑ring cabinet with foam indexing and single‑door hose‑component cabinet, supplied with M8 anchoring hardware
Previous Version

SCHEDULE 4.1(Section 4.21 and paragraph 5(a.2)))

Goods

Column 1Column 2Column 3Column 4Column 5
ItemBusiness NumberTariff Classification NumberGoodsPeriodConditions
1100086768RC00017208.26.00

  • (a) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.138 inches
    • Width: 26.575 inches
    • Length: 12.205 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.138 inches
    • Width: 26.75 inches
    • Length: 8.5 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027
7208.27.00

  • (a) Coil that has all of the following characteristics:

    • Grade: HR340LA
    • Specification: GMW2M-ST-S
    • Thickness: 0.079 inches
    • Width: 47.44 inches
    • Length: 15.905 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: HR340LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.079 inches
    • Width: 30 inches
    • Length: 21.5 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027
7208.38.00.10

  • (a) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.118 inches
    • Width: 33.5 inches
    • Length: 9.125 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2026

  • (b) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.118 inches
    • Width: 34.5 inches
    • Length: 9.125 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.138 inches
    • Width: 28.5 inches
    • Length: 9.25 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027
7208.39.00Coil that has all of the following characteristics:
  • Grade: HR270LA
  • Specification: GMW3032M-ST-S
  • Thickness: 0.091 inches
  • Width: 24.016 inches
  • Length: 9.646 inches
  • Coating: P&O
From March 13, 2025 to December 31, 2027
7208.53.00Blank, cut to length, that has all of the following characteristics:
  • Grade: HR270LA
  • Specification: GMW3032M-ST-S
  • Thickness: 0.118 inches
  • Width: 24 inches
  • Length: 86.85 inches
  • Coating: P&O
From March 13, 2025 to December 31, 2027
7209.16.00.90

  • (a) Coil that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.047 inches
    • Width: 32.362 inches
    • Length: 6.693 inches
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.049 inches
    • Width: 26.7 inches
    • Length: 6.5 inches
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: CR980T/700Y-MP-LCE
    • Specification: GMW3399M-ST-S
    • Thickness: 0.047 inches
    • Width: 47.795 inches
    • Length: 9.252 inches
From March 13, 2025 to December 31, 2027

  • (d) Coil that has all of the following characteristics:

    • Grade: CR420LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.043 inches
    • Width: 42.756 inches
    • Length: 6.375 inches
From March 13, 2025 to December 31, 2027

  • (e) Coil that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.059 inches
    • Width: 39.75 inches
    • Length: 13.3 inches
From March 13, 2025 to December 31, 2026
7210.30.00Blank, cut to length, that has all of the following characteristics:
  • Grade: CR180B2
  • Specification: GMW3032M-ST-S
  • Thickness: 0.059 inches
  • Width: 32.677 inches
  • Length: 14.094 inches
  • Coating: EG 70G70G
From March 13, 2025 to December 31, 2027
7210.49.00.60

  • (a) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.035 inches
    • Width: 58.74 inches
    • Length: 16.457 inches
    • Coating: HDG 90G90G
From March 13, 2025 to December 31, 2027

  • (b) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.039 inches
    • Width: 68.504 inches
    • Length: 37.008 inches
    • Coating: HDG 70G70G
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: CR420LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.039 inches
    • Width: 28.5 inches
    • Length: 8.8 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027
7210.49.00.70

  • (a) Coil that has all of the following characteristics:

    • Grade: LAC240Y320T
    • Specification: MS.50002
    • Thickness: 0.0787 inches
    • Width: 27.56 inches
    • Length: 40.35 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: LAC240Y320T
    • Specification: MS.50002
    • Thickness: 0.0787 inches
    • Width: 27.6 inches
    • Length: 37.8 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: LAC340Y410T
    • Specification: MS.50002
    • Thickness: 0.0787 inches
    • Width: 36.4 inches
    • Length: 31.1 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (d) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 30.95 inches
    • Length: 8.25 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (e) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 38.5 inches
    • Length: 13.55 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (f) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 38.7 inches
    • Length: 13.3 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (g) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.118 inches
    • Width: 42.5 inches
    • Length: 17.6 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (h) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.1185 inches
    • Width: 27.64 inches
    • Length: 13 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (i) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.047 inches
    • Width: 43.504 inches
    • Length: 11.713 inches
    • Coating: HDG 70G70G
From March 13, 2025 to December 31, 2027

  • (j) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.047 inches
    • Width: 44.488 inches
    • Length: 13.819 inches
    • Coating: HDG 70G70G
From March 13, 2025 to December 31, 2027

  • (k) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR3
    • Specification: GMW2M-ST-S
    • Thickness: 0.098 inches
    • Width: 70.236 inches
    • Length: 14.173 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (l) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.071 inches
    • Width: 29.3 inches
    • Length: 107 inches
From March 13, 2025 to December 31, 2027

  • (m) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.071 inches
    • Width: 29.6 inches
    • Length: 111 inches
From March 13, 2025 to December 31, 2027

  • (n) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.071 inches
    • Width: 29.3 inches
    • Length: 107 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (o) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.071 inches
    • Width: 29.6 inches
    • Length: 111 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (p) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.059 inches
    • Width: 29.488 inches
    • Length: 14.508 inches
    • Coating: HDG 70G70G
From March 13, 2025 to December 31, 2027

  • (q) Blank, cut to length, that has all of the following characteristics:

    • Grade: HR550LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 32.25 inches
    • Length: 59.25 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (r) Blank, cut to length, that has all of the following characteristics:

    • Grade: HR550LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 44.45 inches
    • Length: 59.25 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (s) Blank, cut to length, that has all of the following characteristics:

    • Grade: HR550LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 47.205 inches
    • Length: 59.37 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (t) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR780T/420Y-DP
    • Specification: GMW3399M-ST-S
    • Thickness: 0.055 inches
    • Width: 52.362 inches
    • Length: 14.921 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (u) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR04
    • Specification: MS.50002
    • Thickness: 0.098 inches
    • Width: 28.189 inches
    • Length: 78.465 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (v) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.071 inches
    • Width: 27 inches
    • Length: 108 inches
From March 13, 2025 to December 31, 2027

  • (w) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.063 inches
    • Width: 28.85 inches
    • Length: 104.33 inches
From March 13, 2025 to December 31, 2027

  • (x) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.106 inches
    • Width: 23.75 inches
    • Length: 105.57 inches
From March 13, 2025 to December 31, 2027

  • (y) Coil that has all of the following characteristics:

    • Grade: CR340 LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.051 inches
    • Width: 33.25 inches
    • Length: 5 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (z) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR240LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.063 inches
    • Width: 27 inches
    • Length: 99.5 inches
    • Coating: HDG 60G60G
From March 13, 2025 to January 2, 2027
7211.19.00.10Coil that has all of the following characteristics:
  • Grade: CR270LA
  • Specification: GMW3032M-ST-S
  • Thickness: 0.079 inches
  • Width: 22.598 inches
  • Length: 3.28 inches
From March 13, 2025 to December 31, 2027
7211.19.00.90

  • (a) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.091 inches
    • Width: 22 inches
    • Length: 5.25 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.091 inches
    • Width: 22.17 inches
    • Length: 7 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.091 inches
    • Width: 22.5 inches
    • Length: 3.752 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (d) Coil that has all of the following characteristics:

    • Grade: HR340LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 8.937 inches
    • Length: 7.5 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (e) Coil that has all of the following characteristics:

    • Grade: MS.50002
    • Specification: LAH240Y320T
    • Thickness: 0.067 inches
    • Width: 10.2 inches
    • Length: 8.5 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027

  • (f) Blank, cut to length, that has all of the following characteristics:

    • Grade: HR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.118 inches
    • Width: 21.5 inches
    • Length: 85 inches
    • Coating: P&O
From March 13, 2025 to December 31, 2027
7211.23.00Coil that has all of the following characteristics:
  • Grade: CR3
  • Specification: GMW2M-ST-S
  • Thickness: 0.04 inches
  • Width: 13.1 inches
  • Length: 8.86 inches
From March 13, 2025 to December 31, 2027
7212.20.00.30

  • (a) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.031 inches
    • Width: 12.992 inches
    • Length: 4.252 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.033 inches
    • Width: 15.5 inches
    • Length: 10 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.039 inches
    • Width: 16.339 inches
    • Length: 11.654 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (d) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.028 inches
    • Width: 12.5 inches
    • Length: 2.65 inches
    • Coating: EG 60G60G
From March 13, 2025 to December 31, 2027
7212.30.00.30

  • (a) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.031 inches
    • Width: 12.992 inches
    • Length: 4.252 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (b) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.033 inches
    • Width: 15.5 inches
    • Length: 10 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (c) Coil that has all of the following characteristics:

    • Grade: CR180B2
    • Specification: GMW3032M-ST-S
    • Thickness: 0.039 inches
    • Width: 16.339 inches
    • Length: 11.654 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027
7212.30.00.40

  • (a) Coil that has all of the following characteristics:

    • Grade: LAH340Y410T
    • Specification: MS.50002
    • Thickness: 0.1185 inches
    • Width: 14.87 inches
    • Length: 71.43 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (b) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR240LA
    • Specification: GMW3032M-ST-S or GMW16056 type A
    • Thickness: 0.063 inches
    • Width: 23.476 inches
    • Length: 81 inches
From March 13, 2025 to December 31, 2027

  • (c) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S or GMW16056 type C
    • Thickness: 0.071 inches
    • Width: 20.445 inches
    • Length: 107.008 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027

  • (d) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR270LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.071 inches
    • Width: 20.445 inches
    • Length: 107.008 inches
From March 13, 2025 to December 31, 2027

  • (e) Blank, cut to length, that has all of the following characteristics:

    • Grade: CR340LA
    • Specification: GMW3032M-ST-S
    • Thickness: 0.079 inches
    • Width: 16.25 inches
    • Length: 101.125 inches
From March 13, 2025 to December 31, 2027

  • (f) Blank, cut to length, that has all of the following characteristics:

    • Grade: IFC180Y330T
    • Specification: MS.50002
    • Thickness: 0.118 inches
    • Width: 20 inches
    • Length: 34.5 inches
    • Coating: HDG 60G60G
From March 13, 2025 to December 31, 2027
2100101070RC3924.90.00.99Elevated pet food bowl frame of plastic, with adjustable legs and stainless steel bowl insertsFrom March 6, 2025 to April 10, 2025
3100124221RM00027309.00.00.702,500 US gallon water tanks of carbon steel, designed for non-pressurized liquid storageFrom March 13, 2025 and March 27, 2025
4101400760RT00017218.99.00.90Stainless steel in ingots or other primary forms: semi-finished products of stainless steel
7219.21.00Flat-rolled products of stainless steel, of a width 600 mm or more, not further worked than hot-rolled, not in coils, of a thickness exceeding 10 mm
7220.11.00Hot-rolled stainless steel plate, of a width of less than 600 mm , of a thickness of 4.75 mm or more
7220.20.00Flat-rolled products of stainless steel, not further worked than cold-rolled or cold-reduced, of a width of less than 600 mm
7222.11.00.91Hot-rolled stainless steel bars, round, of a diameter of 25 mm or more
7222.19.00.11Hot-rolled stainless steel flat bars, of a diameter of 25 mm or more
7222.19.00.29Hot-rolled stainless steel bars, of rectangular cross section
7222.20.00Cold-formed or cold-finished stainless steel bars, of rectangular cross section
7222.30.00Other bars and rods of stainless steel: angles, shapes and sections of stainless steel
7222.30.00.30Other bars and rods of stainless steel: angles, shapes and sections of stainless steel, high nickel alloy
7228.50.00.90Other bars and rods of solid alloy steel, not further worked than cold-formed or cold-finished
7228.60.00300M AMS 6419 alloy steel round bars
7326.19.90Steel forgings
7326.90.90.90Open-die forged steel plate
7604.29.00Aluminum alloy rods and bars
7606.12.00Aluminum alloy plate, not clad
7608.20.00Aluminum tubes and pipes, of aluminum alloys
7616.99.90.29Aluminum castings
7616.99.90.30Aluminum forgings
5104671094RT00077324.10.00.10From March 13, 2025 to October 31, 2025Imported for sale to company with business number 872894332
7324.10.00.90From March 13, 2025 to October 31, 2025Imported for sale to company with business number 872894332
6119873420RM00027225.99.00

  • (a) Steel coils that have all of the following characteristics:

    • Grade: Ductibor 1000
    • Thickness: 1.14 mm to 2 mm
    • Width:1131 mm to 1240 mm
    • Coating: Al-Si
From March 13, 2025 to December 31, 2027

  • (b) Steel coils that have all of the following characteristics:

    • Grade: Usibor 1500
    • Thickness: 1.4 mm
    • Width: 1628 mm
    • Coating: Al-Si
From March 13, 2025 to December 31, 2027
7123307597RM00137210.49.00.60Imported for sale to vehicle manufacturers
7212.30.00.30Imported for sale to vehicle manufacturers
7318.16.00.90Imported for sale to vehicle manufacturers
7318.19.00Imported for sale to vehicle manufacturers
8123307597RM00197208.39.00Imported for sale to vehicle manufacturers
7209.16.00.90Imported for sale to vehicle manufacturers
7210.30.00Imported for sale to vehicle manufacturers
7212.30.00.30Imported for sale to vehicle manufacturers
7212.30.00.40Imported for sale to vehicle manufacturers
7225.92.00.30Imported for sale to vehicle manufacturers
7225.92.00.40Imported for sale to vehicle manufacturers
7318.15.00.45Imported for sale to vehicle manufacturers
7318.16.00.90Imported for sale to vehicle manufacturers
7318.19.00Imported for sale to vehicle manufacturers
9123307597RM00207210.11.00Imported for sale to vehicle manufacturers
7211.19.00.90Imported for sale to vehicle manufacturers
7211.23.00Imported for sale to vehicle manufacturers
10123307597RM00227208.27.00Imported for sale to vehicle manufacturers
7210.49.00.60Imported for sale to vehicle manufacturers
7211.23.00Imported for sale to vehicle manufacturers
7212.30.00.40Imported for sale to vehicle manufacturers
7226.91.00Imported for sale to vehicle manufacturers
7318.15.00.45Imported for sale to vehicle manufacturers
7318.16.00.90Imported for sale to vehicle manufacturers
11123307597RM00297212.30.00.20Imported for sale to vehicle manufacturers
7212.30.00.30Imported for sale to vehicle manufacturers
7226.99.00.12Imported for sale to vehicle manufacturers
7226.99.00.13Imported for sale to vehicle manufacturers
12123307597RM00307208.27.00Imported for sale to vehicle manufacturers
7210.49.00.50Imported for sale to vehicle manufacturers
7210.49.00.60Imported for sale to vehicle manufacturers
7212.20.00.30Imported for sale to vehicle manufacturers
7212.30.00.20Imported for sale to vehicle manufacturers
7212.30.00.30Imported for sale to vehicle manufacturers
7212.30.00.40Imported for sale to vehicle manufacturers
7225.91.00.20Imported for sale to vehicle manufacturers
7225.92.00.20Imported for sale to vehicle manufacturers
7318.15.00.45Imported for sale to vehicle manufacturers
7318.15.00.49Imported for sale to vehicle manufacturers
7318.16.00.90Imported for sale to vehicle manufacturers
13123307597RM00337208.27.00Imported for sale to vehicle manufacturers
7210.49.00.70Imported for sale to vehicle manufacturers
7211.19.00.90Imported for sale to vehicle manufacturers
7212.30.00Imported for sale to vehicle manufacturers
7226.99.00.99Imported for sale to vehicle manufacturers
14123307597RM00407208.27.00Imported for sale to vehicle manufacturers
7211.19.00.90Imported for sale to vehicle manufacturers
7212.30.00.40Imported for sale to vehicle manufacturers
15127109387RT00017308.90.00.99The following guard rail end barrier systems, of specification AASHTO M180, NCHRP-350 (test level TL-3) and MASH (test level TL-3), with an A123 coating:

  • (a) FLEAT-SP;

  • (b) FLEAT 350;

  • (c) SKT 350;

  • (d) SKT-SP;

  • (e) BEAT;

  • (f) FLEAT MT;

  • (g) BEAT MT

From March 13, 2025 to April 22, 2027Imported for supply to the ministère des Transports et de la Mobilité durable of Quebec
161295536737306.30.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7307.22.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7307.23.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7307.29.99March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7307.99.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7309.00.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7312.10.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7318.14.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7318.15.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7318.16.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7318.19.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7318.22.00March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7325.99.99March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
7326.90.90March 13, 2025 to January 1, 2026Imported for supply to company with business number 887258960
17133586628RM00017310.29.00Tanks, casks, drums or cans, of a capacity of less than 50 litres
18139692198RM00027220.20.00.90

  • (a) Type 435 stainless steel coil, with a thickness of 0.5 mm, of a width of 324 mm, 400 mm or 495.3 mm, coated with protective film;

From March 13, 2025 to December 31, 2025

  • (b) Type 436 stainless steel coil, with a thickness of 0.5 mm, with a width of 50.8 mm, coated protective film;

From March 13, 2025 to December 31, 2025

  • (c) Type 436 stainless steel coil, with a thickness of 0.4826 mm, of a width of 222.25 mm, 450.9 mm, 596.9 mm, or 736.6 mm, coated protective film;

From March 13, 2025 to December 31, 2025

  • (d) Type 430 stainless steel coil, with a thickness of 0.4 mm, with a width of 28.44 mm, used to produce a roof ditch molding

From March 13, 2025 to December 31, 2025
19140433293RC00027214.99.00Bars of steel, round, of grade 40, 50 or 60, of specification CSA G40.21, ASTM A706 or ASTM A615, of a diameter of at least 0.75 inch but not exceeding 1.5 inches, of a length of at least 20 feet but not exceeding 40 feet, coated with epoxy per ASTM A775/A775M.From March 13, 2025 to December 31, 2025
20712584135RM00019506.91.00.90Articles and parts of steel, galvanized steel, high-density polyethylene (HDPE) plastic or aluminum, used to construct outdoor play structures, including installation kitsFrom March 21, 2025 to April 4, 2025Imported for sale to company with the business number 857850044RT00001
217212020187309.00.00

  • (a) Bolted steel glass coated wall panels for a 3.84 million litre custom-built potable water storage tank, of a thickness of 0.2188 inch, 0.25 inch or 0.3125 inch, with AWWA D103 standard, with a width of 57 inches, with a length of 112.03 inches;

From March 13, 2025 to January 31, 2026Imported for sale to company with business number 104625660 or 108128166

  • (b) Bolted steel glass coated wall panels for a 3.84 million litre custom-built potable water storage tank of a thickness of 0.5 inch compliant with AWWA D103 standard, with a width of 18.92 inches, with a length of 116.29 inches

From March 13, 2025 to January 31, 2026Imported for sale to company with business number 104625660 or 108128166.
7610.90.90.10Aluminum dome, disassembled, for a 3.84 million litre custom potable water storage tank, of AWWA D103 standardFrom March 13, 2025 to January 31, 2026Imported for sale to company with business number 104625660 or 108128166
22723167151RM00019504.30.00Games operated by coins, bank notes, bank cards, tokens or by other means of paymentFrom March 4, 2025 to April 25, 2025
23742981707PG00014202.12.90Transport cases with exterior dimensions of 62.5 cm in length, 50 cm in width and 29.7 cm in height and interior dimensions of 55.9 cm in length, 43.2 cm in width and 25.4 cm in height, with lid depth of 51 mm, bottom depth of 203 mm and total depth of 254 mmFrom March 15, 2025 to September 1, 2025Imported for sale to the Royal Military College of Canada
247475429349506.91.00.90Articles and equipment for general physical exerciseFrom March 20, 2025 to March 28, 2025
25755380318RT00017210.49.00.70Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating
7211.29.00Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of at least 1.6 mm but not exceeding 4.2 mm, chemically treated, with a zinc coating
7211.90.00

  • (a) Flat-rolled products of carbon steel, of a width of less than 600 mm, in coils, coated or plated with aluminum, of a thickness of at least 1.6 mm but not exceeding 4.2 mm;

  • (b) Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, in coils, of a thickness of 1.6 mm to 4.2 mm, with a polymeric or plastic coating

26780854485RM0017228.60.00Unthreaded rod bars of alloy steel, cold finished, ground or turned and polished, of grade 4140, of specification ASTMA108, of a length of at least 22 feet but not exceeding 40 feet, with an outer diameter of at least 1.125 inches but not exceeding 1.5 inchesFrom March 13, 2025 to March 31, 2026
7304.31.00Cold drawn seamless tubes of non-alloy carbon steel, meeting ASTM 519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inchFrom March 13, 2025 to March 31, 2026
7304.51.00Cold-drawn seamless tubes of alloy steel, grades AISI 4130 or AISI 8630, meeting ASTM A519, of an outer diameter of at least 1.625 inches but not exceeding 3.75 inches, of an inner diameter of at least 0.977 inch but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inchFrom March 13, 2025 to March 31, 2026
7326.90.10Forged or extruded steel blanks for coupling, cold drawn seamless, of carbon or alloy steel, meeting ASTM A519, of an outsider diameter of at least 1.625 inches but not exceeding 3.75 inches, of inner diameters of at least 0.977 inches but not exceeding 2.73 inches, of a wall thickness of at least 0.180 inch but not exceeding 0.5 inchFrom March 13, 2025 to March 31, 2026
27791357346RT00019405.11.00Chandeliers and other electric ceiling or wall lighting fittings, designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 2025
9405.19.00Chandeliers and other electric ceiling or wall lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 2025
9405.21.00Electric table, desk, bedside or floor-standing luminaires, designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 2025
9405.29.00Electric table, desk, bedside or floor-standing luminaires, other than those designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 2025
9405.42Other electric luminaires and lighting fittings, designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 2025
9405.49Other electric luminaires and lighting fittings, other than those designed for use solely with light-emitting diode (LED) light sourcesFrom March 4, 2025 to April 5, 2025
28816010631RT00015703.29.90Commercial-grade nylon carpet with custom-printed patterns that glow under UV lightingFrom March 27, 2025 to April 2, 2025.Imported for sale to company with business number 779233428
298387829448419.81.00Portable pizza oven, of a kind for use in a food truckFrom March 4, 2025 to April 25, 2025
30841564214RT00011003.90.91Feed barleyFrom March 4, 2025 to May 31, 2025
31849087549RM00017606.12.00Aluminum alloy plates, sheets, and strip, rectangular (including square) of a thickness exceeding 0.2 mm
32855808044RM00017209.16.00.40Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, in coils, of a thickness of at least 1 mm but not exceeding 3 mm, of specification SDIFrom March 13, 2025 to December 31, 2025
7225.50.00Flat-rolled products of other alloy steel, of a width of 600 mm or more, cold-rolled, in coils, of carbon specification, dual phase uncoatedFrom March 13, 2025 to December 31, 2025
7606.12.00.20Aluminum plates, sheets and strip, rectangular (including square) of aluminum alloys, in coils, clad, of a thickness exceeding 0.2 mmFrom March 13, 2025 to December 31, 2025
338561191517616.99.90Aluminum composite material, with a thickness of 4 mm, comprised of two 0.5 mm thick sheets of aluminum that are bonded to a 3.0 mm thick thermal plastic core
34883281107RT00017226.92.00Flat-rolled strip steel for automotive seat tracks, cold-rolled and annealed, of a width of less than 600 mm, 1.7 mm thick, not further workedFrom March 13, 2025 to December 31, 2025
35885957597RT00017308.30.00.29Rolling steel door: McKeon model IS3020E-M-PCRemission limited to one rolling steel door, imported for supply to building project at 400 Albert Street, Ottawa, Ontario
368872589607304.39.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7307.99.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7308.10.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7308.90.00.99From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7309.00.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7318.15.00From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7326.19.90From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
7326.90.90From March 13, 2025 to January 1, 2026Imported for use in the development, expansion, or construction of a canola processing complex and pea protein isolate production plant in Yorkton, Saskatchewan
37890975758RM0017304.19.00Hydraulic line, male-to-male JIC, rated for a nominal pressure of 3,000 psi, with a wall thickness of 0.120 inch, with an outer diameter of 1.25 inches, of a length of 48 inches, 72 inches, 96 inches, or 108 inches, with zinc-plated coatingFrom March 13, 2025 to December 31, 2025
7318.22.00Washers, of a thickness of 1/4 inch, 1/2 inch, 1 inch, or 2 inches, suitable for shimming hydraulic cylindersFrom March 13, 2025 to December 31, 2025
388946341127307.29.99.00From March 13, 2025 to January 1, 2026Imported for sale to company with business number 887258960
7309.00.00From March 13, 2025 to January 1, 2026Imported for sale to company with business number 887258960
7322.90.10From March 13, 2025 to January 1, 2026Imported for sale to company with business number 887258960
39898667639RM00017307.29.99.00Stainless‑steel push‑to‑connect quick-disconnect couplings with matching hose‑support clamps, with 1/4 inch national pipe tapered (NPT), with nitrile seals
7307.91.00.10Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc‑nickel finish
7307.91.00.20Hydraulic flange hose ends of carbon steel, of nominal diameter of at least 3/4 inch but not exceeding 2 inches, straight or 90 degrees, of SAE J518 Code 61 standard, with corrosion-resistant zinc‑nickel finish
7307.92.00.10SAE 45 degree flare and flareless adapters for refrigeration and instrumentation applications, in brass or zinc‑plated steel, with an outer diameter of at least 6 mm but not exceeding 12 mm
7307.92.00.20Permanent‑crimp hose ends for braided hose, made of carbon steel with zinc‑nickel plating, of nominal diameter of at least 1/4 inch but not exceeding 2 inches
7307.99.00.11Air-brake hose with brass sockets and nipples, U.S.DOT (FMVSS 106) and Canadian CMVSS standard, of hose sizes of at least 1/4 inch but not exceeding 2 inches internal diameter
7307.99.00.19Crimpless refrigerant fittings with bite‑type sleeve, assembly, available in carbon‑steel or brass, equipped with hydrogenated nitrile butadiene rubber (HNBR) O‑rings, for hoses of a nominal diameter of at least 1/4 inch but not exceeding 2 inches
7307.99.00.21Crimpless repair splices and female ORFS (o-ring face seal) terminations of carbon steel, with elastomeric seals
7307.99.00.29Permanent‑crimp hose ends for braided and spiral hose, of carbon steel with zinc‑nickel or stainless steel, for hoses of a nominal diameter of at least 1/8 inch but not exceeding 2 inches
7318.16.00.90Carbon steel flare nut, used in hydraulic fitting assemblies and general-purpose applications
7320.20.00.90Helical spring guards of carbon‑steel, with inner diameter of at least 7.9 mm but not exceeding 19 mm, of a length of 3.05 meters or 6.10 meters, with a finish of black oxide or bright zinc coating
7326.90.10Non‑standard spiral‑hose crimp fittings with profiles of carbon steel, with zinc‑nickel coating, of size of at least 1/4 inch but not exceeding 2 inches
7326.90.90.90Residual steel components: crimp ends, clamp halves, bite‑to‑wire adapters and sleeves
7609.00.0037 degree flare adapters (male, female, union, bulkhead) and reusable sleeves for nylon air‑brake tubing, of 6061‑T6 aluminium, for hoses of nominal diameter of at least 3/16 inch but not exceeding 1 inch, with blue anodised finish
7616.99.90.90Reusable swivel ends for use with hoses, of 6061‑T6 aluminium, with black/clear anodised, straight finish

SCHEDULE 5(Paragraph 4.3(a))Motor Vehicles

  • 8703.23.00.10
  • 8703.24.00.10
  • 8703.24.00.21
  • 8703.24.00.22
  • 8703.33.00.10
  • 8703.33.00.21
  • 8703.33.00.22

Page Details

Date modified: